TUNGSTEN CARBIDE GRIT BAND SAW BLADES

Ideal for cutting ceramics and other materials that are too hard or abrasive for standard bimetal blades, tungsten carbide grit blades provide superior wear resistance.

FEATURES & BENEFITS

Provides long life due to their super resistance to heat, wear, and abrasion

Resist snagging while working on hard-to-cut materials

Specifications include both continuous or gulleted edges and various grit sizes

Use coarse grit for faster cutting of thick materials or metals

Use medium grit for thin materials and fine finishes

Continuous grit: For 1/4" (6.4mm) or under wall cross-section. Also good for brittle materials or if surface may chip

Gulleted grit: For 1/4" (6.4mm) or larger wall cross-section

APPLICATIONS

Continuous: Cast Iron (white and high alloy), cement, concrete, ceramics, composites, fiberglass, wire rope, hardened steel. Gulleted: Cast iron (grey with voids), graphite, tires, wire reinforced rubber, ceramics, composite, fiberglass, hardened steel


TPI W x Thk (in) W x Thk (mm) Model # Part #
Continuous, Medium 1/4" x .020 6.4 x 0.50 ZCG010 702000
Gulleted, Medium 3/8" x .025 9.5 x 0.64 ZCG020 733300
Gulleted, Med Coarse 3/8" x .025 9.5 x 0.64 ZCG030 743300
Gulleted, Medium 1/2" x .025 12.7 x 0.64 ZCG040 733400
Gulleted, Med Coarse 1/2" x .025 12.7 x 0.64 ZCG050 743400
Continuous, Medium 1/2" x .025 12.7 x 0.64 ZCG060 703400
Gulleted, Med Coarse 3/4" x .032 19 x 0.80 ZCG070 744400
Gulleted, Coarse 3/4" x .032 19 x 0.80 ZCG080 754400
Gulleted, Med Coarse 1" x .035 27 x 0.90 ZCG090 745500
Gulleted, Coarse 1" x .035 27 x 0.90 ZCG100 755500
Continuous, Medium 1" x .035 27 x 0.90 ZCG110 705500
Continuous, Coarse 1" x .035 27 x 0.90 ZCG120 725500
Gulleted, Coarse 1-1/4" x .042 34 x 1.10 ZCG130 756100

SITE MAP


M. K. Morse - 1101 Eleventh Street SE Canton, OH USA 44707