Morse launches spring-loaded arbor
Morse has launched its latest innovation in cutting technology, the new spring-loaded Pin Drive Hole Saw Arbor. Designed for professionals who demand efficiency and precision, this new arbor is set […]
Morse welcomes new global sales leader
CANTON, Ohio – Morse is pleased to announce Kurt Kocik as its new Vice President of Global Sales. Kocik, an experienced sales and market strategist, will be responsible for managing […]
Morse launches impact hole saw
CANTON, Ohio – Morse has launched an impact hole saw for your thin metal cutting needs. Quickly change sizes with the ¼” impact shanks to effectively cut a variety of […]
Try Metal Devil – FREE!
Take part in our “Try Before You Buy” promotion that offers a no-risk way to see what our Metal Devil circular saw blades can do. From Sept. 1-30, scan the […]
Tech Time: How to choose the right recip blade
Make sure you are selecting the proper reciprocating saw blade for your application. First, you have to identify what material you are cutting. If it is stainless steel, cast iron, […]
Tech Time: Properly clearing chips
When cutting with a hole saw, it is important to frequently clear the chips. This means regularly pulling the tool out of the cut so the chips are able to […]
Tech Time: Changing your wood cutting blade
Know when it is time to change your wood cutting band saw blade. In general, the teeth dull over time and create problems with cut squareness, finish, and time of […]
Tech Time: Using the proper RPM
When cutting with a hand tool, you don’t find users relying on a gauge to check RPM speeds. But operating at the proper RPM for your application ensures the best […]
Tech Time: Choose the right portaband blade tooth size
Cutting with the right size tooth reduces friction, vibration, and ripping of the blade teeth and material, and produces the cleanest cut. Morse has streamlined its portaband lineup to make […]
Tech Time: Wood cutting with shims
You can get very different end results when cutting a large hard wood application with and without shims. In a first attempt, we tried cutting a nearly 4’ cross section […]