Tech Time: Properly clearing chips
When cutting with a hole saw, it is important to frequently clear the chips. This means regularly pulling the tool out of the cut so the chips are able to […]
Tech Time: Changing your wood cutting blade
Know when it is time to change your wood cutting band saw blade. In general, the teeth dull over time and create problems with cut squareness, finish, and time of […]
Tech Time: Using the proper RPM
When cutting with a hand tool, you don’t find users relying on a gauge to check RPM speeds. But operating at the proper RPM for your application ensures the best […]
Tech Time: Choose the right portaband blade tooth size
Cutting with the right size tooth reduces friction, vibration, and ripping of the blade teeth and material, and produces the cleanest cut. Morse has streamlined its portaband lineup to make […]
Tech Time: Wood cutting with shims
You can get very different end results when cutting a large hard wood application with and without shims. In a first attempt, we tried cutting a nearly 4’ cross section […]
Tech Time: Portable band saw blade safety and use
Employ the below best practices and safety tips to get the best cutting results from your portable band saw blades. Before mounting or removing a blade, ensure the machine is […]
Tech Time: Prevent pinching in structural materials
Challenger is a bi-metal band saw blade specifically designed to cut structural materials and I-beams. One common problem when tackling these applications is pinching, which can cause blade breakage, damage […]
Tech Time: How to preload a Revolution blade
Our industrial circular Revolution blades have a bore in the center, but also pin holes. Seat the saw drive pins into the blade pinholes and then tighten the bore. When […]
Get a quote – quick and easy!
Looking to purchase a Morse cutting solution? Let us connect you to a distributor in your area! It is now easier than ever to get a customized quote from a […]
Tackle your structural cutting challenges
Structural cutting can present unique challenges and put your band saw blade to the test. Read on to learn more about four key challenges and how to achieve optimal cutting […]